GPRS not able to activate in neoway M590E modem

  • 2
  • Question
  • Updated 11 months ago
  • (Edited)
In client server socket communication, we followed below AT command sequence for communication.

AT+XISP=0
OK

AT+CGDCONT=1,"IP","internet"
OK

AT+XIIC=1
OK

AT+XIIC?
+XIIC: 0, 0.0.0.0
OK


In that sequence I tried to establish PPP link using (AT+XIIC=1) AT command and also received  OK response. But when I tried to check the PPP link is successfully attached or not using (AT+XIIC?) AT command but always PPP link is not established properly.

so how to resolve this type of issue?
Photo of Bhautik Rupareliya

Bhautik Rupareliya

  • 1 Post
  • 0 Reply Likes

Posted 11 months ago

  • 2
Photo of Harshil Soni

Harshil Soni

  • 1 Post
  • 0 Reply Likes
hello ,

i'm also getting this type of same issue.
but don't found any  solution regarding this issue anywhere.

this is the same sequence I followed as per given in this document link :
https://cdn.instructables.com/ORIG/FX6/UAHQ/IZ6CYGIU/FX6UAHQIZ6CYGIU.pdf

but getting this same issue

other experts please provide any solution
(Edited)