Need help with Linux PPP connection and Telit modem

  • 1
  • Problem
  • Updated 4 years ago
Trying to get PPP up on a custom ARM board running a Yocto flavor of Linux. The same modem, with the same configuration files works fine on a different (but similar) board.

The failed debgug messages are (after removing the account name and password):

pppd &[1] 802
pppd options in effect:
debug           # (from /etc/ppp/options)
nodetach                # (from /etc/ppp/options)
persist         # (from /etc/ppp/options)
dump            # (from /etc/ppp/options)
noauth          # (from /etc/ppp/options)
user              # (from /etc/ppp/options)
password ??????         # (from /etc/ppp/options)
/dev/ttyACM0            # (from /etc/ppp/options)
115200          # (from /etc/ppp/options)
lock            # (from /etc/ppp/options)
connect /usr/sbin/chat -v -t15 -f/etc/ppp/chatscripts/                # (from /etc/ppp/options)
crtscts         # (from /etc/ppp/options)
noaccomp                # (from /etc/ppp/options)
-ac             # (from /etc/ppp/options)
nopcomp         # (from /etc/ppp/options)
lcp-echo-failure 3              # (from /etc/ppp/options)
lcp-echo-interval 3             # (from /etc/ppp/options)
show-password           # (from /etc/ppp/options)
novj            # (from /etc/ppp/options)
novjccomp               # (from /etc/ppp/options)
ipcp-accept-local               # (from /etc/ppp/options)
ipcp-accept-remote              # (from /etc/ppp/options)
noipdefault             # (from /etc/ppp/options)
defaultroute            # (from /etc/ppp/options)
usepeerdns              # (from /etc/ppp/options)
nobsdcomp               # (from /etc/ppp/options)
root@imx6soloc421:/etc/ppp# chat:  May 26 22:21:25 CONNECT
Script /usr/sbin/chat -v -t15 -f/etc/ppp/chatscripts/ finished (pid 803), status = 0x0
Serial connection established.
using channel 1
Using interface ppp0
Connect: ppp0 <--> /dev/ttyACM0
rcvd [LCP ConfReq id=0x1 <asyncmap 0x0> <auth pap> <magic 0x96a24aa4> <pcomp> <accomp>]
sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0x9950d399>]
sent [LCP ConfRej id=0x1 <pcomp> <accomp>]
rcvd [LCP ConfAck id=0x1 <asyncmap 0x0> <magic 0x9950d399>]
rcvd [LCP ConfReq id=0x2 <asyncmap 0x0> <auth pap> <magic 0x96a24aa4>]
sent [LCP ConfAck id=0x2 <asyncmap 0x0> <auth pap> <magic 0x96a24aa4>]
sent [LCP EchoReq id=0x0 magic=0x9950d399]
sent [PAP AuthReq id=0x1 user="" password="XXXXXXXX"]
rcvd [LCP EchoRep id=0x0 magic=0x96a24aa4]
rcvd [PAP AuthAck id=0x1 ""]
PAP authentication succeeded
sent [CCP ConfReq id=0x1 <deflate 15> <deflate(old#) 15>]
sent [IPCP ConfReq id=0x1 <addr> <ms-dns1> <ms-dns2>]
rcvd [LCP ProtRej id=0x3 80 fd 80 fd 01 01 00 0c 1a 04 78 00]
Protocol-Reject for 'Compression Control Protocol' (0x80fd) received
sent [LCP EchoReq id=0x1 magic=0x9950d399]
sent [IPCP ConfReq id=0x1 <addr> <ms-dns1> <ms-dns2>]
rcvd [LCP EchoRep id=0x1 magic=0x96a24aa4]
rcvd [LCP TermReq id=0x4]
LCP terminated by peer
sent [LCP TermAck id=0x4]
Modem hangup
Connection terminated.
Photo of Patrick Philp

Patrick Philp

  • 1 Post
  • 0 Reply Likes

Posted 4 years ago

  • 1
Photo of Norma Pavao

Norma Pavao, Official Rep

  • 175 Posts
  • 2 Reply Likes
Hello Patrick,

Your inquiry has been directed to our engineers for review.  I will provide you an update on their assessment of the reported issue you have submitted.  Thank you for your patience while we investigate this matter.

Photo of Norma Pavao

Norma Pavao, Official Rep

  • 175 Posts
  • 2 Reply Likes
Hello Patrick,

Per review from our engineers the disconnect is being rejected due to compression setting.
It has been recommended you try to add “nodeflate” option in the /etc/ppp/peers/options file, can you attempt this and let me know the results of this change?

Thank you,