Wvdial Configuration Example

  • 1
  • Question
  • Updated 11 months ago
I'm evaluating Aeris for our network of devices. We're using `wvdial` on Debian and I'm curious if anyone has an configuration file they could share?

Here is my first attempt:

[Dialer Defaults]
Init1 = ATZ
Init2 = ATQ V1 E1 S0=0 &C1 &D2 +FCLASS=0
Init3 = AT+CGDCONT=1,"IP","neo.iot.net"
Modem Type = USB Modem
Stupid Mode = 1
New PPPD = yes
Dial Command = atdt
Carrier Check = yes
ISDN = 0
[Dialer KORECDMA]
Modem = /dev/ttyUSB0
Baud = 460800 Phone = #777
Photo of Kenny Koller

Kenny Koller

  • 5 Posts
  • 0 Reply Likes

Posted 11 months ago

  • 1
Photo of Norma Pavao

Norma Pavao, Official Rep

  • 113 Posts
  • 1 Reply Like
Hi Kenny,

Thank you for reaching out and raising your question.  I am not familiar with your dialer but having reviewed the details I see that you have set the correct APN.  Is you dailer not able to register on the cellular network?  Can you provide the ICCID so I can verify the log activity?  I am curious about the section of the configuration [Dialer KORECDMA] is this a default not used in this configuration?  

Appreciate your input to further investigate.

Thank you,
Norma 
Neo Team
Photo of Kenny Koller

Kenny Koller

  • 5 Posts
  • 0 Reply Likes
I seemed to have figured it out. For others I used this with username/password that (apparently) are to be used when none are required. Found the "phone" from one of your other posts Norma:
[Dialer Defaults]
Init1 = ATZ
;Init2 = ATQ V1 E1 S0=0 &C1 &D2 +FCLASS=0
Init3 = AT+CGDCONT=1,"IP","neo.iot.net"
Modem Type = USB Modem
Stupid Mode = 1
New PPPD = yes
Dial Command = atdt
Carrier Check = yes
ISDN = 0
[Dialer KORECDMA]
Modem = /dev/ttyUSB0
Baud = 460800
Phone = *99***1# 
Username = 9180******
Password = 9180******
Photo of Norma Pavao

Norma Pavao, Official Rep

  • 113 Posts
  • 1 Reply Like
Thanks for the info, Kenny.  That did jar my memory on a question surrounding username and password specifically.

Regards,
Norma
Neo Team